The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core.
The ESP32CAM equips the ESP32 with everything necessary to program, ran and develop on the wonder chip. It also features a LiPo charger(IP5306), so your ESP32CAM project can be battery-powered and truly wireless. Additionally, the board reserved the MPU6050, BME280 and an analog MIC.
1. IDF development environment, demo code: github.com/m5stack/esp32-cam-demo
2. Has the MPU6050 & bme280 pads on the board, can do DIY solder easily.
3. Has IP5306, can connect with lithium battery
-Dual-core Tensilica LX6 microprocessor
-Up to 240MHz clock frequency
-520kB internal SRAM
-4MB Flash memory
-Integrated 802.11 BGN WiFi transceiver
-Integrated dual-mode Bluetooth(classic and BLE)
-Hardware accelerated encryption(AES, SHA2, ECC, RSA-4096)
CP2104 USB TTL
8-bit compressed data
8-/10-bit Raw RGB data
Maximum Image Transfer Rate
Scan Mode: Progressive
-CCD size: 1/4inch
-Field of View: 78 degree
Sensor best resolution: 1600*1200
1 x M5Stack Official ESP32 Camera Module